HydroCraft
Conforto TS, High-head submersible drainage pump, 1.1–2.2 kW

TS 1.1–2.2 kW

Conforto TS

High-head submersible drainage pump, 1.1–2.2 kW

ConfortoHydroCraft partner

Conforto TS are two-pole submersible drainage pumps with a head of up to 24 m — the highest in the Conforto drainage range. They are used in handcraft workshops and industry to dispose of clean or slightly dirty water, to lift fluids from tanks and rainwater traps, cellars and to dry out underpasses. They are made of G20 cast iron (motor cover and casing, pump body, impeller) with an AISI 416 stainless steel shaft and a silicon carbide/alumina mechanical seal.

Maximum head
24 m
Maximum flow rate
33.3 m³/h (554 l/min)
Power
1.1 – 2.2 kW (1.5 – 3 HP)

Price and delivery time on request. Working hours: Mon–Fri, 8:30–17:00

Features

What Conforto TS offers

  • The highest head in the drainage range — up to 24 m
  • Build entirely of G20 cast iron
  • AISI 416 stainless steel shaft
  • Silicon carbide/alumina mechanical seal
  • Operation up to 60 °C continuous and up to 90 °C intermittent
  • Fully watertight motor — IP68 protection rating
  • Thermal microswitch set at 130 °C
  • 10 m of H07 RN-F cable with a Schuko plug (single-phase)

Applications

Where it is used

  • Handcraft workshops
  • Industry
  • Tanks and rainwater traps
  • Cellars and underpasses
Supply, installation and servicePumps and pressure systems

Technical data

Conforto TS specifications

Key parameters

Manufacturer
Conforto (Italy)
Series
TS (M — single-phase, T — three-phase)
Type
High-head submersible drainage pump
Power
1.1 – 2.2 kW (1.5 – 3 HP)
Maximum head
24 m
Maximum flow rate
33.3 m³/h (554 l/min)
Max. particle size
7 mm

Operating conditions

Max. liquid temperature
60 °C continuous / 90 °C intermittent
Max. fluid density
1100 kg/m³
Min. pumping level
10 cm above the pump body
Voltage (single-phase)
230–240 V, 50 Hz
Voltage (three-phase)
230/400 V, 50 Hz
Protection rating
IP68
Insulation class
F

Materials

Impeller material
G20 cast iron
Body material
G20 cast iron
Shaft material
AISI 416 stainless steel
Seal
Mechanical, silicon carbide/alumina

Connections and supply

Outlet
2"
Cable
10 m H07 RN-F
Weight
32 – 36 kg
Available models
TS 150/50, 200/50, 300/50 (M/T)

Enquiry about Conforto TS

Tell us about the site and we will confirm the model, the price and the delivery time. Installation and service are done by our own teams.