HydroCraft
Conforto FL, Submersible drainage pump for slightly dirty water, 0.37–2.2 kW

FL 0.37–2.2 kW

Conforto FL

Submersible drainage pump for slightly dirty water, 0.37–2.2 kW

ConfortoHydroCraft partner

Conforto FL are two-pole submersible drainage pumps for clean and slightly dirty water, passing solids from 11 to 29 mm depending on the model. They suit lifting fluids from tanks and rainwater traps, cellars, drying out underpasses and fountains. Six sizes cover flow rates of up to 54 m³/h. They are made of G20 cast iron, with an AISI 416 stainless steel shaft and oil-resistant nitrile rubber gaskets.

Maximum head
19 m
Maximum flow rate
54 m³/h (900 l/min)
Power
0.37 – 2.2 kW (0.5 – 3 HP)
Request a quote0886 834 717

Price and delivery time on request. Working hours: Mon–Fri, 8:30–17:00

Features

What Conforto FL offers

  • Solids from 11 to 29 mm depending on the model
  • Six sizes — from 0.37 to 2.2 kW
  • Flow rate of up to 54 m³/h (900 l/min)
  • Build entirely of G20 cast iron
  • AISI 416 stainless steel shaft and stainless steel screws
  • Operation up to 60 °C continuous and up to 90 °C intermittent
  • Fully watertight motor — IP68 protection rating
  • Threaded and DN 50 flanged outlets

Applications

Where it is used

  • Tanks and rainwater traps
  • Cellars and underpasses
  • Fountains
  • Industry
Supply, installation and servicePumps and pressure systems

Technical data

Conforto FL specifications

Key parameters

Manufacturer
Conforto (Italy)
Series
FL (M — single-phase, T — three-phase)
Type
Submersible drainage pump for slightly dirty water
Power
0.37 – 2.2 kW (0.5 – 3 HP)
Maximum head
19 m
Maximum flow rate
54 m³/h (900 l/min)
Max. particle size
11 – 29 mm depending on the model

Operating conditions

Max. liquid temperature
60 °C continuous / 90 °C intermittent
Max. fluid density
1100 kg/m³
Min. pumping level
10 cm above the pump body
Voltage (single-phase)
230–240 V, 50 Hz
Voltage (three-phase)
230/400 V, 50 Hz
Protection rating
IP68
Insulation class
F

Materials

Impeller material
G20 cast iron
Body material
G20 cast iron
Shaft material
AISI 416 stainless steel
Seal
Mechanical, silicon carbide/alumina

Connections and supply

Outlet
Threaded 1" 1/4 – 1" 1/2 or DN 50 flange
Cable
5 – 10 m H07 RN-F
Weight
11 – 36 kg
Available models
FL 50/32, 80/40, 100/40, 150/50, 200/50 (M/T), FL 300/50 (T)

Drainage Pumps

More models in this category

All 6 models

Enquiry about Conforto FL

Tell us about the site and we will confirm the model, the price and the delivery time. Installation and service are done by our own teams.

0886 834 717All contact details