HydroCraft
Conforto FH, High-flow submersible drainage pump, 0.55–2.2 kW

FH 0.55–2.2 kW

Conforto FH

High-flow submersible drainage pump, 0.55–2.2 kW

ConfortoHydroCraft partner

Conforto FH are two-pole submersible drainage pumps with the highest flow rate in the range — up to 58.5 m³/h. They pass solids from 15 to 25 mm. They suit lifting fluids from tanks and rainwater traps, cellars, drying out underpasses and fountains. Seven sizes, including R versions with a more compact body. They are made of G20 cast iron, with an AISI 416 stainless steel shaft and oil-resistant nitrile rubber gaskets.

Maximum head
19 m
Maximum flow rate
58.5 m³/h (975 l/min)
Power
0.55 – 2.2 kW (0.75 – 3 HP)
Request a quote0886 834 717

Price and delivery time on request. Working hours: Mon–Fri, 8:30–17:00

Features

What Conforto FH offers

  • The highest flow rate in the range — up to 58.5 m³/h (975 l/min)
  • Solids from 15 to 25 mm
  • Seven sizes, including compact R versions
  • Build entirely of G20 cast iron
  • AISI 416 stainless steel shaft and stainless steel screws
  • Operation up to 60 °C continuous and up to 90 °C intermittent
  • Fully watertight motor — IP68 protection rating
  • Thermal microswitch set at 130 °C

Applications

Where it is used

  • Tanks and rainwater traps
  • Cellars and underpasses
  • Fountains
  • Industry
Supply, installation and servicePumps and pressure systems

Technical data

Conforto FH specifications

Key parameters

Manufacturer
Conforto (Italy)
Series
FH (M — single-phase, T — three-phase)
Type
High-flow submersible drainage pump
Power
0.55 – 2.2 kW (0.75 – 3 HP)
Maximum head
19 m
Maximum flow rate
58.5 m³/h (975 l/min)
Max. particle size
15 – 25 mm depending on the model

Operating conditions

Max. liquid temperature
60 °C continuous / 90 °C intermittent
Max. fluid density
1100 kg/m³
Min. pumping level
10 cm above the pump body
Voltage (single-phase)
230–240 V, 50 Hz
Voltage (three-phase)
230/400 V, 50 Hz
Protection rating
IP68
Insulation class
F

Materials

Impeller material
G20 cast iron
Body material
G20 cast iron
Shaft material
AISI 416 stainless steel
Seal
Mechanical, silicon carbide/alumina

Connections and supply

Outlet
1" 1/2 – 2"
Cable
10 m H07 RN-F
Weight
16.5 – 30 kg
Available models
FH 80/40, 100/40, 150/50 R, 150/50, 200/50, 300/50 (M/T), FH 200/50 R (T)

Drainage Pumps

More models in this category

All 6 models

Enquiry about Conforto FH

Tell us about the site and we will confirm the model, the price and the delivery time. Installation and service are done by our own teams.

0886 834 717All contact details