HydroCraft
Conforto S, Submersible drainage pump for clean water, 0.37–2.2 kW

S 0.37–2.2 kW

Conforto S

Submersible drainage pump for clean water, 0.37–2.2 kW

ConfortoHydroCraft partner

Conforto S are two-pole submersible drainage pumps for clean and slightly dirty water containing solids of up to 7 mm. They suit lifting fluids from tanks and rainwater traps, cellars and drying out underpasses. Six sizes cover flow rates of up to 54 m³/h. They are made of G20 cast iron (motor cover and casing, pump body, impeller), an AISI 416 stainless steel shaft, stainless steel screws and oil-resistant nitrile rubber gaskets.

Maximum head
19 m
Maximum flow rate
54 m³/h (900 l/min)
Power
0.37 – 2.2 kW (0.5 – 3 HP)
Request a quote0886 834 717

Price and delivery time on request. Working hours: Mon–Fri, 8:30–17:00

Features

What Conforto S offers

  • Six sizes — from 0.37 to 2.2 kW
  • Flow rate of up to 54 m³/h (900 l/min)
  • Build entirely of G20 cast iron
  • AISI 416 stainless steel shaft and stainless steel screws
  • Operation up to 60 °C continuous and up to 90 °C intermittent
  • Fully watertight motor — IP68 protection rating
  • Thermal microswitch set at 130 °C
  • Threaded and DN 50 flanged outlets

Applications

Where it is used

  • Tanks and rainwater traps
  • Cellars and underpasses
  • Handcraft workshops
  • Industry
Supply, installation and servicePumps and pressure systems

Technical data

Conforto S specifications

Key parameters

Manufacturer
Conforto (Italy)
Series
S (M — single-phase, T — three-phase)
Type
Submersible drainage pump for clean water
Power
0.37 – 2.2 kW (0.5 – 3 HP)
Maximum head
19 m
Maximum flow rate
54 m³/h (900 l/min)
Max. particle size
6 – 7 mm

Operating conditions

Max. liquid temperature
60 °C continuous / 90 °C intermittent
Max. fluid density
1100 kg/m³
Min. pumping level
10 cm above the pump body
Voltage (single-phase)
230–240 V, 50 Hz
Voltage (three-phase)
230/400 V, 50 Hz
Protection rating
IP68
Insulation class
F

Materials

Impeller material
G20 cast iron
Body material
G20 cast iron
Shaft material
AISI 416 stainless steel
Seal
Mechanical, silicon carbide/alumina

Connections and supply

Outlet
Threaded 1" 1/4 – 1" 1/2 or DN 50 flange
Cable
5 – 10 m H07 RN-F
Weight
11.7 – 37.2 kg
Available models
S 50/32, 80/40, 100/40, 150/50, 200/50 (M/T), S 300/50 (T)

Drainage Pumps

More models in this category

All 6 models

Enquiry about Conforto S

Tell us about the site and we will confirm the model, the price and the delivery time. Installation and service are done by our own teams.

0886 834 717All contact details