HydroCraft
Conforto KM, Heavy-duty submersible sludge pump with an open single-groove impeller, 4–7.5 kW

KM 4–7.5 kW

Conforto KM

Heavy-duty submersible sludge pump with an open single-groove impeller, 4–7.5 kW

ConfortoHydroCraft partner

Conforto KM are two-pole three-phase submersible pumps for heavy-duty applications in the industrial, agricultural and civil sectors — draining clean and dirty waters containing suspended and filamentous matter, activated or untreated sludge. The impeller is a highly efficient open single-groove type, and the casing comes with a DN 65 or DN 80 flanged delivery. Three seals: an upper alumina/graphite seal, an intermediate silicon carbide seal and a lower lip seal, the two lower ones lubricated from an oil sump. A conductivity sensor in the sump monitors the presence of the lubricating fluid.

Maximum head
32 m
Maximum flow rate
160.8 m³/h (2680 l/min)
Power
4 kW and 7.5 kW (5.5 and 10 HP)
Request a quote0886 834 717

Price and delivery time on request. Working hours: Mon–Fri, 8:30–17:00

Features

What Conforto KM offers

  • Highly efficient open single-groove impeller
  • Solids of up to 55 mm
  • Flow rate of up to 160.8 m³/h (2680 l/min), head of up to 32 m
  • Three seals with a lubricating oil sump
  • Conductivity sensor monitoring the lubricating fluid
  • DN 65 or DN 80 flanged delivery
  • Prelubricated watertight bearings
  • Fully watertight motor — IP68 protection rating

Applications

Where it is used

  • Industry
  • Agriculture
  • Residential systems
  • Activated and untreated sludge
Supply, installation and servicePumps and pressure systems

Technical data

Conforto KM specifications

Key parameters

Manufacturer
Conforto (Italy)
Series
KM (three-phase only)
Type
Submersible pump with an open single-groove impeller
Power
4 kW and 7.5 kW (5.5 and 10 HP)
Maximum head
32 m
Maximum flow rate
160.8 m³/h (2680 l/min)
Max. particle size
45 mm (550/65) / 55 mm (1000/80)
Speed
2850 rpm

Operating conditions

Max. liquid temperature
40 °C continuous / 80 °C intermittent
Max. fluid density
1100 kg/m³
Min. pumping level
20 cm above the pump body
Voltage (4 kW)
230/400 V, 50 Hz — direct start-up
Voltage (7.5 kW)
400/690 V, 50 Hz — star/delta start-up
Protection rating
IP68
Insulation class
F

Materials

Impeller material
G20 cast iron
Body material
G20 cast iron
Shaft material
AISI 416 stainless steel
Seal
Upper alumina/graphite, intermediate silicon carbide, lower lip seal

Connections and supply

Outlet
DN 65 or DN 80 flange
Cable
10 m H07 RN-F with free terminals
Weight
60 – 85 kg
Available models
KM 550/65-2 T, KM 1000/80-2 T

Wastewater Pumps

More models in this category

All 10 models

Enquiry about Conforto KM

Tell us about the site and we will confirm the model, the price and the delivery time. Installation and service are done by our own teams.

0886 834 717All contact details