HydroCraft
Conforto FP, Submersible dirty-water pump, 0.37–2.2 kW

FP 0.37–2.2 kW

Conforto FP

Submersible dirty-water pump, 0.37–2.2 kW

ConfortoHydroCraft partner

Conforto FP are two-pole submersible pumps for clean or dirty water, passing solids from 25 to 45 mm depending on the model. Six sizes cover flow rates of up to 48.6 m³/h. They are used in handcraft workshops and industry, for lifting fluids from tanks and rainwater traps, cellars and drying out underpasses. They are made of G20 cast iron, with an AISI 416 stainless steel shaft, stainless steel screws and oil-resistant nitrile rubber gaskets.

Maximum head
12 m
Maximum flow rate
48.6 m³/h (810 l/min)
Power
0.37 – 2.2 kW (0.5 – 3 HP)
Request a quote0886 834 717

Price and delivery time on request. Working hours: Mon–Fri, 8:30–17:00

Features

What Conforto FP offers

  • Solids from 25 to 45 mm depending on the model
  • Six sizes — from 0.37 to 2.2 kW
  • Flow rate of up to 48.6 m³/h (810 l/min)
  • Build entirely of G20 cast iron
  • AISI 416 stainless steel shaft and stainless steel screws
  • Silicon carbide/alumina mechanical seal
  • Operation up to 60 °C continuous and up to 90 °C intermittent
  • Fully watertight motor — IP68 protection rating

Applications

Where it is used

  • Pumping dirty water
  • Tanks and rainwater traps
  • Cellars and underpasses
  • Shipbuilding and industry
Supply, installation and servicePumps and pressure systems

Technical data

Conforto FP specifications

Key parameters

Manufacturer
Conforto (Italy)
Series
FP (M — single-phase, T — three-phase)
Type
Submersible dirty-water pump
Power
0.37 – 2.2 kW (0.5 – 3 HP)
Maximum head
12 m
Maximum flow rate
48.6 m³/h (810 l/min)
Max. particle size
25 – 45 mm depending on the model

Operating conditions

Max. liquid temperature
60 °C continuous / 90 °C intermittent
Max. fluid density
1100 kg/m³
Min. pumping level
10 cm above the pump body
Voltage (single-phase)
230–240 V, 50 Hz
Voltage (three-phase)
230/400 V, 50 Hz
Protection rating
IP68
Insulation class
F

Materials

Impeller material
G20 cast iron
Body material
G20 cast iron
Shaft material
AISI 416 stainless steel
Seal
Mechanical, silicon carbide/alumina

Connections and supply

Outlet
Threaded 1" 1/4 – 2"
Cable
5 – 10 m H07 RN-F
Weight
11 – 36 kg
Available models
FP 50/32, 80/40, 100/40, 150/50, 200/50 (M/T), FP 300/50 (T)

Wastewater Pumps

More models in this category

All 10 models

Enquiry about Conforto FP

Tell us about the site and we will confirm the model, the price and the delivery time. Installation and service are done by our own teams.

0886 834 717All contact details