HydroCraft
Conforto KM 4-pole, Four-pole submersible sludge pump with a single-groove impeller, 3 kW

KM 4-pole 3 kW

Conforto KM 4-pole

Four-pole submersible sludge pump with a single-groove impeller, 3 kW

ConfortoHydroCraft partner

The four-pole version of the Conforto KM are three-phase submersible pumps with a highly efficient open single-groove impeller. The low speed (1450 rpm) means less wear in abrasive media, while the large impeller passage delivers a flow rate of up to 144 m³/h. They are used in the industrial, agricultural and civil sectors for draining clean and dirty waters containing suspended and filamentous matter, activated or untreated sludge. The casing comes with a DN 80 or DN 100 flanged delivery.

Maximum head
13 m
Maximum flow rate
144 m³/h (2400 l/min)
Power
3 kW (4 HP)
Request a quote0886 834 717

Price and delivery time on request. Working hours: Mon–Fri, 8:30–17:00

Features

What Conforto KM 4-pole offers

  • Highly efficient open single-groove impeller
  • Solids of up to 70 mm
  • Four-pole motor, 1450 rpm — less wear
  • Flow rate of up to 144 m³/h (2400 l/min)
  • Three seals with a lubricating oil sump
  • Conductivity sensor monitoring the lubricating fluid
  • DN 80 or DN 100 flanged delivery
  • Fully watertight motor — IP68 protection rating

Applications

Where it is used

  • Industry
  • Agriculture
  • Residential systems
  • Activated and untreated sludge
Supply, installation and servicePumps and pressure systems

Technical data

Conforto KM 4-pole specifications

Key parameters

Manufacturer
Conforto (Italy)
Series
KM 4-pole (three-phase only)
Type
Four-pole submersible pump with an open single-groove impeller
Power
3 kW (4 HP)
Maximum head
13 m
Maximum flow rate
144 m³/h (2400 l/min)
Max. particle size
70 mm
Speed
1450 rpm

Operating conditions

Max. liquid temperature
40 °C continuous / 80 °C intermittent
Max. fluid density
1100 kg/m³
Min. pumping level
20 cm above the pump body
Voltage (three-phase)
230/400 V, 50 Hz (direct) or 400/690 V (star)
Protection rating
IP68
Insulation class
F

Materials

Impeller material
G20 cast iron
Body material
G20 cast iron
Shaft material
AISI 416 stainless steel
Seal
Upper alumina/graphite, intermediate silicon carbide, lower lip seal

Connections and supply

Outlet
DN 80 or DN 100 flange
Cable
10 m H07 RN-F with free terminals
Weight
67 – 70 kg
Available models
KM 400/80-4 T, KM 400/100-4 T

Wastewater Pumps

More models in this category

All 10 models

Enquiry about Conforto KM 4-pole

Tell us about the site and we will confirm the model, the price and the delivery time. Installation and service are done by our own teams.

0886 834 717All contact details